Desoldering Tool, Manual Tin Suction Cup, Desoldering Pump Solder Removal Tool
Features:* Aluminum alloy + plastic material used for all kinds of tin removal work, with powerful tin removal function and high efficiency.*With a unique tin crushing method, it is easy to remove tin residue from the suction nozzle without clogging.* Lightweight design, easy to change nozzle, easy to carry, suitable for long-term use and improve work efficiency.1. Desoldering with tin remover.First, the air pressure in the tin remover is drained and glued, and then the disassembled solder points are heated to melt the solder, and then the nozzle of the tin remover is aligned to the melted solder and thenPress the small elevation on the tin remover, and the solder is sucked into the tin remover.2. Desoldering with a tin-absorbing electric soldering iron (electric heating tin absorber).The tin absorbing electric soldering iron is also a special desoldering iron, which can heat the solder joints and suck tin into the inner cavity to complete the desoldering. Desoldering is delicate.Improper operation results in damage to components, breakage of printed wires and detachment of pads.3. Desoldering with tin tape (copper strand).Place rosin on the front end of the tin suction tape, place it on the soldering point to be desoldered and then place the electric soldering iron on the tin suction tape to heat the soldering point. If the solder is not sucked out at once, the process can be repeated until suction. Cut off the solder filled part of the solder strip.
FAMOUS ELECTRONICS BD
Category List
All products
Features:
* Aluminum alloy + plastic material used for all kinds of tin removal work, with powerful tin removal function and high efficiency.
*With a unique tin crushing method, it is easy to remove tin residue from the suction nozzle without clogging.
* Lightweight design, easy to change nozzle, easy to carry, suitable for long-term use and improve work efficiency.
1. Desoldering with tin remover.
First, the air pressure in the tin remover is drained and glued, and then the disassembled solder points are heated to melt the solder, and then the nozzle of the tin remover is aligned to the melted solder and then
Press the small elevation on the tin remover, and the solder is sucked into the tin remover.
2. Desoldering with a tin-absorbing electric soldering iron (electric heating tin absorber).
The tin absorbing electric soldering iron is also a special desoldering iron, which can heat the solder joints and suck tin into the inner cavity to complete the desoldering. Desoldering is delicate.
Improper operation results in damage to components, breakage of printed wires and detachment of pads.
3. Desoldering with tin tape (copper strand).
Place rosin on the front end of the tin suction tape, place it on the soldering point to be desoldered and then place the electric soldering iron on the tin suction tape to heat the soldering point. If the solder is not sucked out at once, the process can be repeated until suction. Cut off the solder filled part of the solder strip.
* Aluminum alloy + plastic material used for all kinds of tin removal work, with powerful tin removal function and high efficiency.
*With a unique tin crushing method, it is easy to remove tin residue from the suction nozzle without clogging.
* Lightweight design, easy to change nozzle, easy to carry, suitable for long-term use and improve work efficiency.
1. Desoldering with tin remover.
First, the air pressure in the tin remover is drained and glued, and then the disassembled solder points are heated to melt the solder, and then the nozzle of the tin remover is aligned to the melted solder and then
Press the small elevation on the tin remover, and the solder is sucked into the tin remover.
2. Desoldering with a tin-absorbing electric soldering iron (electric heating tin absorber).
The tin absorbing electric soldering iron is also a special desoldering iron, which can heat the solder joints and suck tin into the inner cavity to complete the desoldering. Desoldering is delicate.
Improper operation results in damage to components, breakage of printed wires and detachment of pads.
3. Desoldering with tin tape (copper strand).
Place rosin on the front end of the tin suction tape, place it on the soldering point to be desoldered and then place the electric soldering iron on the tin suction tape to heat the soldering point. If the solder is not sucked out at once, the process can be repeated until suction. Cut off the solder filled part of the solder strip.
Desoldering Tool, Manual Tin Suction Cup, Desoldering Pump Solder Removal Tool
65 BDT135 BDTSave 70 BDT
Total sold : 34
Features:
* Aluminum alloy + plastic material used for all kinds of tin removal work, with powerful tin removal function and high efficiency.
*With a unique tin crushing method, it is easy to remove tin residue from the suction nozzle without clogging.
* Lightweight design, easy to change nozzle, easy to carry, suitable for long-term use and improve work efficiency.
1. Desoldering with tin remover.
First, the air pressure in the tin remover is drained and glued, and then the disassembled solder points are heated to melt the solder, and then the nozzle of the tin remover is aligned to the melted solder and then
Press the small elevation on the tin remover, and the solder is sucked into the tin remover.
2. Desoldering with a tin-absorbing electric soldering iron (electric heating tin absorber).
The tin absorbing electric soldering iron is also a special desoldering iron, which can heat the solder joints and suck tin into the inner cavity to complete the desoldering. Desoldering is delicate.
Improper operation results in damage to components, breakage of printed wires and detachment of pads.
3. Desoldering with tin tape (copper strand).
Place rosin on the front end of the tin suction tape, place it on the soldering point to be desoldered and then place the electric soldering iron on the tin suction tape to heat the soldering point. If the solder is not sucked out at once, the process can be repeated until suction. Cut off the solder filled part of the solder strip.
* Aluminum alloy + plastic material used for all kinds of tin removal work, with powerful tin removal function and high efficiency.
*With a unique tin crushing method, it is easy to remove tin residue from the suction nozzle without clogging.
* Lightweight design, easy to change nozzle, easy to carry, suitable for long-term use and improve work efficiency.
1. Desoldering with tin remover.
First, the air pressure in the tin remover is drained and glued, and then the disassembled solder points are heated to melt the solder, and then the nozzle of the tin remover is aligned to the melted solder and then
Press the small elevation on the tin remover, and the solder is sucked into the tin remover.
2. Desoldering with a tin-absorbing electric soldering iron (electric heating tin absorber).
The tin absorbing electric soldering iron is also a special desoldering iron, which can heat the solder joints and suck tin into the inner cavity to complete the desoldering. Desoldering is delicate.
Improper operation results in damage to components, breakage of printed wires and detachment of pads.
3. Desoldering with tin tape (copper strand).
Place rosin on the front end of the tin suction tape, place it on the soldering point to be desoldered and then place the electric soldering iron on the tin suction tape to heat the soldering point. If the solder is not sucked out at once, the process can be repeated until suction. Cut off the solder filled part of the solder strip.