Type-C USB 5V 2A Power Converter Power Module - Li-ion Lithium Charging Protection Board - for USB Devices with Enhanced Safety Features
Support external buttons, connect the button to the K point and the output negative pole, short press to turn on the power display and turn on the 5V output, two short presses in a row will turn off the power display and turn off the 5V output.When the voltage drops below 4.1V, the charging cycle restarts. When the voltage is lower than 2.8V, the will be precharged with a current of 180mA.The output will be turned off when the load current is continuously less than 50mA. Support charging and discharging.When the charging current drops to 100mA after reaching the final float voltage, the charging cycle will be automatically terminated.The USB-A female socket welding position is provided on the back of the product, and the female socket can be installed manually.
FAMOUS ELECTRONICS BD
Category List
All products
HandTools
Module
Robotics
Battery
Motor
BatteryPack
Soldering Tools
Amplifier
PowerBank and Accessories
Charger and Adaptor
- Support external buttons, connect the button to the K point and the output negative pole, short press to turn on the power display and turn on the 5V output, two short presses in a row will turn off the power display and turn off the 5V output.
- When the voltage drops below 4.1V, the charging cycle restarts. When the voltage is lower than 2.8V, the will be precharged with a current of 180mA.
- The output will be turned off when the load current is continuously less than 50mA. Support charging and discharging.
- When the charging current drops to 100mA after reaching the final float voltage, the charging cycle will be automatically terminated.
- The USB-A female socket welding position is provided on the back of the product, and the female socket can be installed manually.
Type-C USB 5V 2A Power Converter Power Module - Li-Ion Lithium Charging Protection Board - For USB Devices With Enhanced Safety Features
90 BDT235 BDTSave 145 BDT
Total sold : 29
- Support external buttons, connect the button to the K point and the output negative pole, short press to turn on the power display and turn on the 5V output, two short presses in a row will turn off the power display and turn off the 5V output.
- When the voltage drops below 4.1V, the charging cycle restarts. When the voltage is lower than 2.8V, the will be precharged with a current of 180mA.
- The output will be turned off when the load current is continuously less than 50mA. Support charging and discharging.
- When the charging current drops to 100mA after reaching the final float voltage, the charging cycle will be automatically terminated.
- The USB-A female socket welding position is provided on the back of the product, and the female socket can be installed manually.