12V 24V 20A Auto-Cut Charger
Specification:- Plug: UK 3pin- Output Voltage: DC 12/24v- Input Voltage: AC220V/50Hz- Charing Current: 20A- Dimension: ~220x104x70mm- Weight: ~0.7kg- Built-in ventilation cooling fan- Function: Reverse connection protection, overheat protection, low voltage protection, short circuit protection and overcurrent protection. This is 3 stages smart charger. It has more protection to battery compared to pulse charging charger. Pulse charging charger is mainly focused on repairing battery. - Charger will be auto switching between 12v or 24v depending on battery voltage. - Two modes to switch, NORMAL and STRONG. - Switch to NORMAL to charge dry battery and switch to STRONG to charge wet battery.- During charging, red light will be blinking. - After fully charge, the red light will stop blinking.
FAMOUS ELECTRONICS BD
Category List
All products
HandTools
Module
Robotics
Battery
Motor
BatteryPack
Soldering Tools
Amplifier
PowerBank and Accessories
Charger and Adaptor
Specification:
- Plug: UK 3pin
- Output Voltage: DC 12/24v
- Input Voltage: AC220V/50Hz
- Charing Current: 20A
- Dimension: ~220x104x70mm
- Weight: ~0.7kg
- Built-in ventilation cooling fan
- Function: Reverse connection protection, overheat protection, low voltage protection, short circuit protection and overcurrent protection. This is 3 stages smart charger. It has more protection to battery compared to pulse charging charger. Pulse charging charger is mainly focused on repairing battery.
- Charger will be auto switching between 12v or 24v depending on battery voltage.
- Two modes to switch, NORMAL and STRONG.
- Switch to NORMAL to charge dry battery and switch to STRONG to charge wet battery.
- During charging, red light will be blinking.
- After fully charge, the red light will stop blinking.
- Plug: UK 3pin
- Output Voltage: DC 12/24v
- Input Voltage: AC220V/50Hz
- Charing Current: 20A
- Dimension: ~220x104x70mm
- Weight: ~0.7kg
- Built-in ventilation cooling fan
- Function: Reverse connection protection, overheat protection, low voltage protection, short circuit protection and overcurrent protection. This is 3 stages smart charger. It has more protection to battery compared to pulse charging charger. Pulse charging charger is mainly focused on repairing battery.
- Charger will be auto switching between 12v or 24v depending on battery voltage.
- Two modes to switch, NORMAL and STRONG.
- Switch to NORMAL to charge dry battery and switch to STRONG to charge wet battery.
- During charging, red light will be blinking.
- After fully charge, the red light will stop blinking.
12V 24V 20A Auto-Cut Charger
1,450 BDT1,675 BDTSave 225 BDT
Total sold : 5
Specification:
- Plug: UK 3pin
- Output Voltage: DC 12/24v
- Input Voltage: AC220V/50Hz
- Charing Current: 20A
- Dimension: ~220x104x70mm
- Weight: ~0.7kg
- Built-in ventilation cooling fan
- Function: Reverse connection protection, overheat protection, low voltage protection, short circuit protection and overcurrent protection. This is 3 stages smart charger. It has more protection to battery compared to pulse charging charger. Pulse charging charger is mainly focused on repairing battery.
- Charger will be auto switching between 12v or 24v depending on battery voltage.
- Two modes to switch, NORMAL and STRONG.
- Switch to NORMAL to charge dry battery and switch to STRONG to charge wet battery.
- During charging, red light will be blinking.
- After fully charge, the red light will stop blinking.
- Plug: UK 3pin
- Output Voltage: DC 12/24v
- Input Voltage: AC220V/50Hz
- Charing Current: 20A
- Dimension: ~220x104x70mm
- Weight: ~0.7kg
- Built-in ventilation cooling fan
- Function: Reverse connection protection, overheat protection, low voltage protection, short circuit protection and overcurrent protection. This is 3 stages smart charger. It has more protection to battery compared to pulse charging charger. Pulse charging charger is mainly focused on repairing battery.
- Charger will be auto switching between 12v or 24v depending on battery voltage.
- Two modes to switch, NORMAL and STRONG.
- Switch to NORMAL to charge dry battery and switch to STRONG to charge wet battery.
- During charging, red light will be blinking.
- After fully charge, the red light will stop blinking.